23AWG Single Strand Breadboard Connecting Wire (Black and Red - 1+1 Meter) [C] DIP Switches It is really easy to

It is really easy to plug all the components on the PCB and solder them

The maximum input current at 18V is 1uA whereas 100nA at 18V and 25°C

To connect it with your Arduino or Raspberry Pi connect the TX and RX pins to the controller and power the device with VCC pin connected to 5V pin

combination of two cells can be used to drive a 3

The MQ7 Sensor has a small heating element present which is needed to preheat the sensor to get it in the working window

23AWG Single Strand Breadboard Connecting Wire (Black and Red - 1+1 Meter) [C] DIP Switches It is really easy toThis is a set of single strand hook up wires that can be used to make simple breadboard connections during prototyping. They are used as an alternative to the connecting jumper wires. A single set consists of two flexible wires, each of 1 meter length. One wire is of a red colour and the other wire is of a black colour. This a high quality set that creates firm and neat connections. The copper conductors in the wires are tinned to reduce oxidation and